Tripods & Accessories

Scangrip Flexible Magnetic Arm [Line Light Range]
20cm magnetic flexible arm with clip holder to hold Line Light R & Line Light C+R work lights.
The magnetic flexible arm is a tailor-made suspension system which enables the user to position the light units exactly where they want it.
Its strong magnet ensures the light will not be dislodges whilst suspended.

Manufactures Part No.
03.5218

The light diffuser is designed to spread and soften the light, enabling you to illuminate an entire workspace and avoiding hard shadows. It gives you increased functionality and new possibilities to adapt your work light even further to the specific work task.

The cover is incredibly smooth and lightweight. The strong built-in magnets make it easy and safe to mount the cover on your SCANGRIP lamp.

Using the SCANGRIP DIFFUSER together with MULTIMATCH 3 increases the functionality of the work light significantly as the diffuser softens and spreads the light on the surface of the car, so you avoid the glare and hard shadows from the light. The SCANGRIP DIFFUSER is especially applicable for checking high spots while coating, as well on car dent repair and detecting dust nibs on painting.

Spreads and softens the light avoiding hard shadows
Illuminates the entire working area – even into the darkest corner
Minimizes reflections and harsh light
Reduces blinding

Compatible with: 
03.5440 NOVA 3K
03.5441 NOVA 3K C+R
03.6000 NOVA 4 SPS
03.6101 NOVA 4 CAS
03.5653 MULTIMATCH 3

STRONG MAGNETIC MOUNTING BRACKET FOR FLEXIBLE POSITIONING OF LARGE WORK LIGHTS
The MAGNETIC BRACKET LARGE is an extremely powerful work light bracket designed for flexible mounting and positioning of the large work lights on any magnetic surface. It is now available in a new design.

The magnetic mounting bracket has 2 extremely powerful magnets with a holding force of more than 20 kg each, providing altogether a holding force equivalent to 420N.

The rubber-coated magnets protect and avoid scratching the surface and are very flexible as they are turnable and can be rotated to any desirable position. This means that the magnetic work light bracket can be used even if the magnetic surface available is limited.

The simple and one-hand-operated mounting bracket ensures fast and secure installation, and the lamp can be tilted to any position required in the daily work. A built-in stop mechanism avoids the work light from falling out of the bracket. Press the button to release.

For the minor work lights, we recommend using the small MAGNETIC BRACKET item no. 03.5390 with half the holding force.

The air cushioned SCANGRIP TRIPOD 4.5m is designed for stationary and flexible positioning of the SITE LIGHTS work lights that provide extremely bright illumination of a large working area of the building site.

Extendable from 2.2 m to 4.5 m, the tripod offers complete flexibility to position the work light into the required height and angle. When mounted on the tripod, the light can be tilted to provide the optimum beam angle. The tripod is supplied with a built-in air cushioned safety system feature for safe and easy use that prevents accidental drops or falls when raising or lowering the tripod.

The tripod is made of durable powder coated steel, has a welded steel mounting cap (10 mm thread) and fits a DIN14640 connection adapter with bracket for mounting on a tripod. The stable construction of the SCANGRIP TRIPOD makes it safe even when fully extended. It is supplied with anchor points that provide an opportunity for extra stability if the tripod is exposed to strong wind or standing on an uneven surface.

The SCANGRIP WHEEL STAND is developed for mobile positioning of the work light in the detailing workshop. It makes it easy to move the light to where you need it, and at the same time you avoid uncomfortable and heavy lifting from one workplace to the other.

The SCANGRIP WHEEL STAND is extendable from 0.9m/3ft to 1.9m/6.2ft and comes in an upgraded design. The new base is equipped with 5 wheels for improved safety and stability and easy maneuverability. The wheels are sturdy and of high quality and roll easily even on uneven surfaces. 2 of the wheels are lockable to secure a safe and fixed position.

It is fast and easy to position the work light on the SCANGRIP WHEEL STAND, and when mounted the light can be tilted to provide the optimum beam angle. When the job is done, it can easily be put aside.

As an additional feature of the new, upgraded WHEEL STAND it now comes with a flexible bracket that enables you to easily position a second work light to illuminate from below. The extra mounting bracket is adjustable in the height and provides complete flexibility to position the light in the optimum height. When working on the side of the car or doing prep work at the panel this dual light option provides perfect, shadow free illumination from the upper side as well as from the underside.

The SCANGRIP WHEEL STAND is made of durable and sturdy powder coated steel for both indoor and outdoor use.

Scangrip Scaffolding Bracket -Ex | Explosion Proof
Designed to fit the NOVA-EX work light range, the explosion proof scaffolding bracket is made from the same durable material as regular scaffolding fittings.

Weight: 900g

ZONE 1 & 21

Explosion Proof Rating:
II 2G Ex db eb mb op is IIC T4 Gb
II 2D Ex tb IIIC T85°C Db IP65

Explosion Proof Certificates:
ATEX Statement No. 64.105.17.02965.01 

Designed by Scangrip in Denmark
Manufacturer's Part No.: 03.5609

Scangrip | MAGNETIC BRACKET Explosion Proof
The Explosion proof magnetic bracket is designed to position the NOVA-EX work lights on magnetic surfaces. The bracket has two very strong ruberised magnets on each end that can hold a weight of 10Kg each! The bracket is also equipped with a quick release pin which ensures fast installation and removal.

Weight:
900g

ZONE 1 & 21

Explosion Proof Classifications:
II 2G Ex db eb mb op is IIC T4 Gb
II 2D Ex tb IIIC T85°C Db IP65

Explosion Proof Certifications:
ATEX Statement No. 64.105.17.02770.01 

3 YEAR WARRANTY
Designed by Scangrip in Denmark
Manufacturers Part No.: 03.5608

Scangrip TRIPOD-EX | Explosion Proof Tripod
The TRIPOD-EX is an explosion proof light stand and tripod, that allows for stationary positioning of the NOVA-EX range. It is designed to meet any working situation in hazardous areas where illumination is key.

The TRIPOD-EX is extendable from 1.5M to 3.0M. Made from coated steel, this tripod is extremely durable and is fitted with safety clips to position cables safely and out of the way.

ZONE 1 & 21

Specifications:
Net Weight- 6kg
Dimensions- 1080 x 140 x 130 mm

Explosion proof rating:
II 2G Ex db eb mb op is IIC T4 Gb
II 2D Ex tb IIIC T85°C Db IP65

Explosion proof certificate:
ATEX Statement No. 64.105.17.02966.01

3 YEAR WARRANTY
Designed by Scangrip in Denmark
Manufacturers Part No.:
03.5607